How to Reset Your Whirlpool Washing Machine? So Easy!

Read Time:6 Minute, 43 Second

The Whirlpool washer, like other equipment in your house, needs regular maintenance to be in excellent working order. Resetting your Whirlpool washer is one of the things you can do to maintain it in good working order. You may return the Whirlpool washer to its original settings by resetting it, which will allow you to optimize its potential and achieve the finest cleaning performance.

Many problems, such as clothing that are not spinning or taking too long to dry, can be solved by resetting your washing machine.

First and foremost, there are several versions of Whirlpool washing machines. If you can identify the type of washing machine you have and follow the instructions for that, great; if not, we have a fast approach for you to reset all Whirlpool washing machines.

Table of Contents

How to Confirm That Your Whirlpool Washing Machine Has Been Reset

After you’ve completed the preceding steps, hit the START button. Are all of the cycle indication lights on? If they are, push the START / STOP button once. Turn the dial until the following three lights illuminate: RINSE, WASH, and STOP. Then turn off and unplug your washer for 10 seconds. It should be reset when you turn it back on.

To check that the reset was successful, conduct a test load without any clothes. If it did not, you can attempt the above step again. If it doesn’t work, proceed to the next step and attempt the Cabrio reset method.

How to Reset Your Whirlpool Washing Machine?

Method 1: Disconnect the washing machine.

The most popular method for resetting a Whirlpool washing machine is to turn off the machine. The reset works by letting the washing machine’s electrical charge to dissipate, allowing it to reset. If the reset fails, try it again, but this time wait twice as long. Before unplugging the washing machine, check sure it is switched off on the control panel for safety and to avoid damaging it.

To reset your Whirlpool washer, follow these steps:

Using the control panel, turn off the washing machine.
Turn off the washing machine.
Allow three minutes.
Reconnect the washer and wait thirty seconds before turning it on.

Method 2: Resetting the Circuit Breaker

This technique will usually reset the washing machine.

If you are unable to unhook the washing machine, you can turn off the electricity by resetting the circuit breaker on your home’s electrical panel.

To reset your Whirlpool washer, follow these steps:

Using the control panel, turn off the washing machine.
In your home’s electrical panel, locate the washing machine’s circuit breaker.
Lift the circuit breaker to turn off the washer’s electricity.
Allow three minutes.
To restore electricity to the washer, reset the circuit breaker.
Wait 30 seconds before turning on the washer from the control panel.

Method 3: Press a Group of Buttons

To reset the washer, some Whirlpool machines need a combination of buttons to be pushed or held down. Finding the handbook for the washing machine is the easiest approach to determine which buttons must be hit to reset it. If you can’t find the manual, a combination of the Pause/Cancel and Power buttons on your Whirlpool model may work.

To reset your Whirlpool washing machine, follow these steps:

Two times on the Pause/Cancel button.
Once, press the Power button.
If the reset was successful, you should hear a beep or see the display panel flash.
Method 3: Slide the Dial
If your washing machine has a control panel dial, you may be able to reset it by following the steps below.
Using the control panel, turn off the washing machine.
Set the dial to “Normal.”
One-click counterclockwise on the dial.
Turn the dial three times clockwise.
One-click counterclockwise on the dial.
Turn the dial one click clockwise.
Start by pressing the Start button. A control panel should be illuminated.
Check that the Rinse, Wash, and Stop buttons are lit up. Turning the dial or tapping these buttons should bring them to life.
On the control panel, turn off the washer.
Unplug the washing machine for twenty seconds.

Start the washing. If the procedure was successful, your washer will now be reset.

Method 4: Close and Open the Lid

If you have a top-loading Whirlpool washing machine, you may need to open and close the lid to reset it.

To reset a top-loading Whirlpool washer, follow these steps:
Turn off the washing machine.
Wait one minute before reconnecting the washing machine.
Six times in twelve seconds, open and close the lid.

If the reset was successful, you should hear a beep or see the control panel light up, depending on the washer.

Method 5: Press the Power and Program Buttons at the same time.

If none of the above techniques work, you may be able to reset your model by pushing the following buttons: Power, Program, and Water Level. After pushing these buttons, the lid of the washing machine must be opened and closed.

To reset a Whirlpool washing machine, follow these steps:

Make sure the washer’s electricity is switched on at the wall, but leave the Power button on the control turned off.
Hold down the Program button while pushing the Water Level button two times. The control panel lights should glow if everything is done correctly.
Except for the Power button, press each button on the control panel one at a time.
Open the washing machine lid; you should hear it beep.
When you close the washing machine lid, it should start a reset cycle.

If none of the following techniques work to reset your Whirlpool washer, the control board may be faulty. If this is the case, it may be time to consider hiring a skilled expert to troubleshoot and repair the washing machine.

How to Reset a Whirlpool Top Load Washing Machine?

If your Whirlpool Washing Machine isn’t working properly, there are several possible solutions. However, before you begin resetting the machine, consult your owner’s handbook to determine the optimum reset technique for your specific model.

Where to Put Detergent in a Whirlpool Washing Machine

If your Whirlpool Washing Machine has a dispenser drawer: you can put detergent in the drawer that contains the dispenser. Whether it’s concentrated, liquid or powdered, make sure it’s in the right place for the detergent you use. If your machine does not have a dispenser drawer: the main washing tub with detergent. Assuming it is a concentrated, liquid or powder detergent, check to make sure it is in the correct position. Some people sometimes like to put detergent into a net bag before adding it to the equipment. The detergent will be evenly distributed to avoid caking. No matter which method is adopted, we need to ensure that the detergent has been put into the washing machine before adding clothes.

If you have other problems with washing machines, welcome to check the following guides!